Product Name		K10/k20/K30/K40 Tungsten carbide tire studs for HPGR rollers
Grade	Equal to ISO Category Number	Density (G/Cm3)	Hardness (HRA)	Bend Strength (TRS/N/mm2)	Application
YG4C	K10 K20 K30 K40	15.00	89.5	1800	Maily used as small buttons for percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations.
YG6		15.00	90	1700	Maily used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations.
YG8		14.7	88.5	2200	Maily used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations.
YG8C		14.7	88.0	2300	Maily used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations.
YG9C		14.50	87.0	2400	Maily used as the inserts and buttons for rotary-percussive bits, coal-cutting bits and tricone bits to cut medium-hard and hard formations.
YG11C		14.40	86.5	2450	Chiefly for the inserts and buttons of heavy rock drill bits and rotary-percussive bits, coal-cutting bits and tricone bits to cut medium-hard and hard formations.
YG13C		14.30	86.0	2500	Mainly used as the inserts and buttons of tricone bits rotary-percussive bits and heavy rock drill bits to cut medium-hard and hard formations.
YG15		14.00	86.5	2500	It is stronger, and is mainly used as the inserts and buttons of rotary-percussive bits, heavy rock drill bits to cut hard and very hard formations.
YG16		14.10-14.30	87.5	2400	It is mainly used for making cemented carbide substrate tips to be used in PDC cutters for excavating coal and oil field PDC bits.
YG20		13.40-13.70	85.0	2254	Mainly for the stamping dies used in the conditions of heavy impact load and large strees.

Production Technology Features

1. Hemispherical to protect the studs from being destroyed by stress concentration.

2. Round edges, protect the studs being damaged during production,transportation,installment and using.

3. HIP sintering ensure good compactness and high toughness for the products.

4. Special technology to eliminate the surface stress after surface grinding, and increase the surface hardness at the same time.

5. Grease used on surface of the products to avoid oxidization.

Production Process

K10 K20 K30 K40 Tungsten Carbide Studs For HPGR Rollers

K10 K20 K30 K40 Tungsten Carbide Studs For HPGR Rollers

Tungsten Carbide Wear Parts

Tungsten Carbide Seal Rings

Tungsten Carbide Sleeve

Tungsten Carbide Nozzle

Drill Bit Nozzle

Choke Bean

Choke Stem and Seat

Tungsten Carbide Pins

Tungsten Carbide Bushing

Carbide Ball and Seat

Tungsten Carbide Pellets

Tungsten Carbide Studs

Tungsten Carbide Burrs

Valve Trim and Assembly Parts

K10 K20 K30 K40 Tungsten Carbide Studs For HPGR Rollers

carbide finishing bur

end mill solid carbide

yield strength of tungsten carbide